SAE J2665 Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method

Product Code:SAE J2665
Title:Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method
Issuing Committee:Fuel Systems Standards Committee
Scope:This test standard covers the procedure for measuring the permeation of fuel or fuel surrogates through test samples of elastomeric, plastic or composite materials, up to about 3 mm thick. The method involves filing a test cup with the test fluid (fuel or fuel surrogate), sealing test sample over the open end of the cup, and then placing the sealed container into an oven at the desired test temperature and measuring the weight loss over time. Permeation rates are calculated from the rate of weight loss and the exposed area of the test sample. Standard permeation test temperatures are 40 C and 60C. Standard test fluids are Fuel C, Fuel CE10 and Fuel CM15. Other fluids, such as Fuel CMTBE15, and other volatile liquids may be tested accordingly to this procedure as desired (SAE J1681). The method is not applicable for measuring permeation of higher boiling materials that will not completely evaporate from the exterior surface of the sample at the test temperature.

标准名称：	自（冷锻、切边、搓丝）机完好要求和检查评定方法
中标分类：
发布日期：	1900-01-01
实施日期：	1997-01-01
首发日期：	1900-01-01
作废日期：	1900-01-01
出版日期：	1900-01-01
页数：	5页

标准资料网-标准资料免费资源平台